
Technical Specifications
Main Parameter
Model: |
H210RFM |
|
Max. RPM |
21,000 rpm |
|
Max. RCF |
48,900*g |
|
Max. Capacity |
3,000ml |
|
Display |
Dual Display, LCD & LED |
|
Program memory |
40 memory |
|
Drive system |
Brushless and frequency conversion motor with torque |
|
Acceleration |
10 profiles |
|
Deceleration |
10 profiles |
|
Timer |
|
0 - 99hours 59min, with hold function, continuous mode |
Pre-condition |
pre-cooling system |
|
Temperature Range |
-20 degree ~ +40 degree |
|
Safety system |
Imbalance protection system, over-speed and temperature control ,inner lock protection |
|
Dimension |
810*710*1220 mm |
|
Power supply |
220V/230V/160V,35A, 50Hz-60Hz |
|
Angle Rotor List
No. |
Capacity(ml) |
Max speed (r/min) |
Max RCF (*g) |
Tube size(mm) (Diameter*Height) |
1 |
16*10ml (insert for 1.5ml tube) |
21,000 |
48,900 |
16*81 |
2 |
6*50ml |
20,000 |
43,000 |
28*105 |
3 |
8*100ml |
12,000 |
19,830 |
38*124 |
4 |
4*300ml |
11,000 |
19,300 |
63*158 |
5 |
6*300ml |
1,0000 |
18,500 |
63*158 |
6 |
20*1.5/2.0ml |
15,000 |
21,000 |
10*42 |
Swing Rotor List
No. |
Capacity(ml) |
Max speed (r/min) |
Max RCF (*g) |
Tube size(mm) Diameter*Height |
7 |
4*750ml |
5,000 |
5,470 |
80*140 |
8 |
4*50ml |
5,000 |
4,390 |
28*115 |
9 |
32*15ml |
4,000 |
3,160 |
16*118 |
10 |
8*50ml |
4,000 |
2,950 |
28*115 |
Bucket Rotor List
No. |
Capacity(ml) |
Max speed (r/min) |
Max RCF (*g) |
Tube size(mm) Diameter*Height |
11 |
2*2*96 holes |
4,000 |
2,200 |
For ELISAPLATE |
1. Microprocessor controlled, programmable; TFT-LCD screen showed the working status.
2. Universal refrigerated; precooling program with rotor spinning and temperature selectable by operator; Temp. sensor inside the chamber; Gas R 404A, HFC/CFC free
3. 40 memories of program;
4. Lid latch lock;
5. Imbalance, over speed, over temperature switch off; electronic lock lid, strap broken and door interlocking protection function for the safety of people and instrument. The parameter can be changed at operating state.
6. chamber of centrifugation in stainless steel; viewing and calibration port in the lid; manual overriding; short spin key
7. Setting or changing the RCF and speed during the operation,
8. Automatically storing the parameter
9. Adjustable rise-and-fail speed from grade 0 to 9 with kinds of self-defining models,
If there is any question, welcome to contact with us by e-mail [email protected]!
Biolekon Scientific Instruments Co., Limited



